Design and Manufacturing of Micro Fabricated Planar Coils with High Turn Density

K. Anil; R.Dhasaratha Naik; G. Ranjan Kumar

doi:10.21276/ijirem.2017.4.6.1

Abstract

This work key point is to achieve the high turn’s density without reducing the conductor section in order to limit Joule heating and ohmic losses. This paper aims to present and validate a fabrication process for the fulfilling of the aforementioned tasks addresses the design and the fabrication of small scale square planar coils with high density of turns and self inductances up to Then, an effective process flow based on polyimide (PI) and copper processing is presented, and the key aspects of the processing are discussed. Finally, the fabricated coils are characterized both electrically and morphologically, and the results are compared to the model showing good agreement with the theoretical calculations.

Keywords

Ohmic losses, heating , design, fabricated

Reference

[1] S. S. Mohan, M. del Mar Hershenson, S. P. Boyd, and T. H. Lee, “Simple accurate expressions for planar spiral inductances,” IEEE Journal of Solid-State Circuits, vol. 34, no. 10, pp. 1419–1424, Oct 1999.

[2] L. Gu and X. Li, “High-q solenoid inductors with a cmoscompatible concave-suspending mems process,” Journal of Microelectromechanical Systems, vol. 16, no. 5, pp. 1162– 1172, Oct 2007.

[3] V. Badilita, K. Kratt, T. Burger, J. G. Korvink, and U. Wallrabe, “3d high aspect ratio, mems integrated microsolenoids and helmholtz micro-coils,” in TRANSDUCERS 2009 - 2009 International Solid-State Sensors, Actuators and Microsystems Conference, June 2009, pp. 1106– 1109.

[4] S. S. Mohan, M. del Mar Hershenson, S. P. Boyd, and T. H. Lee, “Simple accurate expressions for planar spiral inductances,” IEEE Journal of Solid-State Circuits, vol. 34, no. 10, pp. 1419–1424, Oct 1999.

[5] L. Gu and X. Li, “High-q solenoid inductors with a cmoscompatible concave-suspending mems process,” Journal of Microelectromechanical Systems, vol. 16, no. 5, pp. 1162– 1172, Oct 2007.

[6] V. Badilita, K. Kratt, T. Burger, J. G. Korvink, and U. Wallrabe, “3d high aspect ratio, mems integrated microsolenoids and helmholtz micro-coils,” in TRANSDUCERS 2009 - 2009 International Solid-State Sensors, Actuators and Microsystems Conference, June 2009, pp. 1106– 1109.

[7] Tavel, P. 2007. Modeling and Simulation Den. AK Peters Ltd., Natick, MA.

[8] Sannella, M. J. 1994. Constraint Satisfaction and Debugging for Interactive User Interfaces. Doctoral Thesis. UMI Order Number: UMI Order No. GAX95-09398., University of Washington.

[9] Forman, G. 2003. An extensive empirical study of feature selection metrics for text classification. J. Mach. Learn. Res. 3 (Mar. 2003), 1289-1305.

[10] Brown, L. D., Hua, H., and Gao, C. 2003. A widget framework for augmented interaction in SCAPE. In Proceedings of the 16th Annual IJIREM Symposium on User Interface Software and Technology (Vancouver, Canada, November 02 - 05, 2003). UIST '03. IJIREM, New York, NY, 1-10. DOI= http://doi.IJIREM.org/10.1145/964696.964697.

[11] Yu, Y. T. and Lau, M. F. 2006. A comparison of MC/DC, MUMCUT and several other coverage criteria for logical decisions. J. Syst. Softw. 79, 5 (May. 2006), 577-590. DOI= http://dx.doi.org/10.1016/j.jss.2005.05.030.

[12] Spector, A. Z. 1989. Achieving application requirements. In Distributed Systems, S. Mullender, Ed. IJIREM Press Frontier Series. IJIREM, New York, NY, 19-33. DOI= http://doi.IJIREM.org/10.1145/90417.90738

Cites this article as

[K. Anil , R.Dhasaratha Naik , G. Ranjan Kumar (2017), Design and Manufacturing of Micro Fabricated Planar Coils with High Turn Density , International Journal of Innovative Research in Engineering & Management (IJIREM), Vol-4, Issue-6, Page No-753-756], (ISSN 2347 - 5552). www.ijirem.org