Enhancing the Strength Characteristics of Concrete Using Polypropylene Fiber and Steel Fiber in Combination as Partial Replacement of Fine Aggregates

Mohd Anzer Bhat; Shakshi Chalotra

doi:10.55524/ijirem.2022.9.2.95

Abstract

Structural stability and structural strength is the key component for any structure to withstand heavy loads. The past decade is enforcing the enormous approaches to stabilise the structure in order to meet its shelf life. In India due to increase in the population approaches for high rise structures have paved high demand and key click for the people to get acquainted with. The approaches are quite interesting for durability and sustainability of such high rise structures. In order enforce such quality of work and have such stability approaches have been framed out on the effective use of Polypropylene fibre and Steel fibre in combination with replacement as fine aggregate. This approach is enforced to limit the structural instability thus imparting strength parameters such as Compressive strength, Tensile strength and Flexural strength enhancement.

Keywords

Polypropylene Fibre, Steel Fibre, Siliceous, Argillaceous, Polymer, Strength.

References

Harkamal singh,2019, ijert, compressive strength and durability increases with the addition of abp and polypropylene fabric.
Divya s dharan,aswathy lal 2016,ijert,study the effect of polypropylene fiber in concrete.
Milind v. Mohod,2012, ijes, by using steel fibre increases the resistance and compressive strength of concrete.
Jacek katzer, 2014, rg, increases the tensile strength of concrete.
Pramod kawdae, 2017, abhijit varudkar, ijesrt, improves the mechanical properties, durability and serviceability of structure.
mukilan k,2019, ramesh babu c chitambar ganesh a, ijeat, steel fibre increases the tensile and compressive strength of concrete at different proportions.
Shrikanth m.harle, 2019, ijsrnsc, it provides good durability and workability of concrete.
V. Ramadevi, and d.l. Venkatesh babu, “flexural behavior of hybrid (steel and polypropylene) fibre reinforced concrete beams,” european journal of scientific research, vol. 70 no. 1, pp. 81 – 87, 2012.
Is: 4031, “indian standard specification for physical test for hydraulic cement–determination of compressive strength, bureau of indian standards, new delhi, 1988.
Is: 12269 “indian standard specification for 53 grade ordinary portland cement,” bureau of indian standards, new delhi, 1987.
Is 383, “indian standard specification for coarse and fine aggregate for natural sources for concrete,” bureau of indian standards, new delhi, second revision, feb. 1997.
Is: 516 (1959), “indian standard methods of tests for strength of concrete,” bureau of indian standards, new delhi, india.
patodi, s. C. And kulkarni, c. V., (2012), “performance evaluation of hybrid fiber reinforced concrete matrix,” international journal of engineering research and applications (ijera), vol. 2, issue 5, september-october, pp.1856-1863.

Cites this article as

M. A. Bhat, S. Chalotra, "Enhancing the Strength Characteristics of Concrete Using Polypropylene Fiber and Steel Fiber in Combination as Partial Replacement of Fine Aggregates", International Journal of Innovative Research in Engineering & Management (IJIREM), Vol-9, Issue-2, Page No-608-612, 2022. Available from: https://doi.org/10.55524/ijirem.2022.9.2.95

Corresponding Author

Mohd Anzer Bhat

M. Tech Scholar, Department of Civil Engineering, RIMT University Mandi, Gobindgarh, Punjab, India

Download Full Paper

Download PDF

No. of Downloads: 22 | No. of Views: 585

-->

Enhancing the Strength Characteristics of Concrete Using Polypropylene Fiber and Steel Fiber in Combination as Partial Replacement of Fine Aggregates

Citations

Download Full Paper PDF

Total View 585

Total Download 22