International Journal of Innovative Research in Engineering and Management
Year: 2015, Volume: 2, Issue: 5
First page : ( 81) Last page : ( 88)
Online ISSN : 2350-0557.
Ricardo Batista Penteado , Rubia Fernanda Toledo de Oliveira , Marcos Valério Ribeiro , Messias Borges Silva
The objective of this work is using a nickel based alloy Nimonic 80A optimize and control the variable response Roughness (Ra)in an external cylindrical turning using CNC Machining. Seeking the machining optimization, was used the Taguchi Method as a tool to improve this process, using the Orthogonal Array L16, operating in two levels. The machining experiments were accomplished considering the machining parameters: cutting speed, cutting depth, feed rate, kind of tool and cutting fluid. The results indicated by the Taguchi Method showed to be very useful in quality process improvement, highlighting feed rate as most significant controllable variable.
[1] Antony, J.,Anand, R.B., Kumar M. e Tiwari, M.K., 2006. Multiple response optimization using Taguchi methodology and neuro-fuzzy based model. Journal of Manufacturing Technology Management, Vol. 17 Iss: 7, pp.908 – 925.
[2] Besseris, G. J. 2008. Product Screening to Multicustomer Preferences: MultiresponseUnreplicated Nested Super-ranking. International Journal of Quality, Statistics, and Reliability, v. 2008, 16p.
[3] Bouacha, K.; Yallese, M. A.; Mabrouki, T.; Rigal, J. F 2010. Statistical analysis of surface roughness and cutting forces using response surface methodology in hard turning of AISI 52100 bearing steel with CBN tool.Int. Journal of Refractory Metals & Hard Materials 28, pp.349–361.
[4] Calamaz, M., Coupard, D., Girot, F. 2008.A new material model for 2D numerical simulation of serrated chip formation when machining titanium alloy Ti–6Al–4V. International Journal of Machine Tools & Manufacture 48, pp. 275–288.
[5] Chen, W.C., Hsu, Y.Y., Hsieh, L.F., Tai, P.H. 2010.A systematic optimization approach for assembly sequence planning using Taguchi method, DOE, and BPNN. Expert Systems with Applications 37, pp. 716–726.
[6] Choudhury, I.A., El-Baradie, M.A. 1998. Machinability of nickel-base super alloys: A general review. Journal of Materials Processing Technology 77, pp. 278–284.
[7] Darwish, S.M. 2000, “The impact of the tool material and the cutting parameters on surface roughness of supermet 718 nickel superalloy” Journal of Materials Processing Technology, Vol.97, pp.10-18.
[8]De Souza, Helder Jose Celani; Moyses ,Cinthia B. ; Pontes ,Fabrício J.; Duarte, Roberto N.; Da Silva, Carlos Eduardo Sanches; Alberto, Fernando Lopes; Ferreira,Ubirajara R.; Silva, Messias Borges. (2011). Molecular assay optimized by Taguchi experimental design method for venous thromboembolism investigation. Molecular and Cellular Probes, V. 25 pg 231- 237. doi:10.1016/j.mcp.2011.08.001
[9] Ezugwu, E.O., Wang, Z.M., Machado, A.R. 1999.The machinability of nickel-based alloys: A review. Journal of Materials Processing Technology 86, pp. 1–16.
[10] Fox-Rabinovich, G.S., B.D. Beake, K. Yamamoto, M.H. Aguirre, S.C. Veldhuis, G. Dosbaeva, A. Elfizy, A. Biksa, L.S. Shuster, 2010. Structure, properties and wear performance of nano-multilayered TiAlCrSiYN/TiAlCrN coatings during machining of Ni-based aerospace superalloys. Surface & Coatings Technology 204, 3698– 3706.
[11] Gaitonde, V.N., Karnik, S.R., Figueira, Luis, Davim, J. Paulo.2009. Machinability investigations in hard turning of AISI D2 cold work tool steel with conventional and wiper ceramic inserts Int. Journal of Refractory Metals & Hard Materials 27, 754–763.
[12] Gurel, S., Akturk, M.S. 2007. Considering manufacturing cost and scheduling performance on a CNC turning machine. European Journal of Operational Research 177, 325–343.
[13] Habeeb, H.H., Abou-El-Hossein, K.A., Mohammad, B., Kadirgama, K. 2008.Effect of tool holder geometry and cutting condition when milling nickel-based alloy 242.journal of materials processing technology 201, 483– 485.
[14] Hajjaji, N., Renaudin, V., Houas, A., Pons, M. N. 2010. Factorial design of experiment (DOE) for parametric exergetic investigation of a steam methane reforming process for hydrogen production.Chemical Engineering and Processing 49, 500–507.
[15] Jawahir, I.S.,Wang, X. 2007. Development of hybrid predictive models and optimization techniques for machining operations.Journal of Materials Processing Technology 185, 46–59.
[16] Kamata, Y., Obikawa, T. 2007. High speed MQL finish-turning of Inconel 718 with different coated tools.Journal of Materials Processing Technology 192– 193.281–286.
[17] Kim, D.K., Kim. D.Y., Ryu, S.H., Kim, D.J. 2001.Application of nimonic 80 A to the hot forging of an exhaust valve head.Journal of Materials Processing Technology 113, 148-152.
[18] Kishore, R.A., Tiwari, R., Dvivedi, A.; Singh, I. 2009. Taguchi analysis of the residual tensile strength after drillingin glass fiber reinforced epoxy composites. Materials and Design 30, Issue 6, 2186-2190.
[19] Kleijnen, J.P.C.; Sanches, S.M.; Lucas, T.W.; Cioppa, T.M. 2005. State-of-the-Art Review: A User’s Guide to the Brave New World of Designing Simulation Experiments. Journal on Computing, v.17, n.3, 263–289.
[20] Lee, H. W., Kwon, W. T. 2010. Determination of the minute range for RSM to select the optimum cutting conditions during turning on CNC lathe. Journal of Mechanical Science and Technology 24 (8), 1637-1645.
[21] Phadke, M.S. 1989. Quality Engineering using Robust Design, Prent ice Hall, New Jersey.
[22] Ribeiro, M. V., Moreira, M. R. V.. e Ferreira, J. R., 2003, “Optimization of titanium alloy (6Al-4V) machining. Journal of Materials Processing Technology”, v 143/144C, pp. 453-458.
[23] Rosa, J.L.; Robin, A.; Silva, M.B.; Baldan, C.A.; Peres, M.P. 2009. Electrodeposition of copper on titanium wires: Taguchi experimental design approach. journal of materials processing technology 209, 1181–1188.
[24] Special Metals. Nimonic alloy 80 A. www.specialmetals.com accessed 05/02/2015
[25] Xiansheng, N.; Zhenggan, Z.; Xingwei, W.; Luming, L. 2011. The use of Taguchi method to optimize the laser welding of sealing neuro-stimulator. Optics and Lasers in Engineering 49, 297–304.
[26] Taner, T., Antony, J. 2006.Applying Taguchi methods to health care. Leadership in Health Services, v. 19, 26–35.
[27] Tillmann, W., Vogli, E., Herper, J., Biermann, D., Pantke, K. 2010. Development of temperature sensor thin films to monitor turning processes. Journal of Materials Processing Technology 210, 819–823.
[28] Tzeng, C. J.; Lin, Y. H.; Uang, Y. K.; Jeong, M. C. 2009. Optimization of turning operations with multiple performance characteristics using the Taguchi method and Grey relational analysis.Journal of Materials Processing Technology, 209, p. 2753–2759.
[29] Ulutan, D., Ozel, T. 2011. Machining induced surface integrity in titanium and nickel alloys: A review. International Journal of Machine Tools & Manufacture 51, 250–280.
[30] Wang, X., Da, Z. J., Balaji, A. K. and Jawahir, I.S., 2007. “Performance-Based Predictive Models and Optimization Methods for Turning Operations and Applications: Part 3—Optimum Cutting Conditions and Selection of Cutting Tools”.Journal of Manufacturing Processes. Vol. 9, n 1, 61-74.
[31] Yih-fong, T. 2006. “Parameter design optimisation of computerised numerical control turning tool steels for high dimensional precision and accuracy”. Materials and Design, Vol.27, pp. 665–675.
[32] Zhu, Y., Zhu, Z., Xiang Z., Yin, Z., Wu, Z., Yan, W. 2009. Microstructural evolution in 4Cr10Si2Mo at the 4Cr10Si2Mo/Nimonic 80A weld joint by inertia friction welding. Journal of Alloys and Compounds 476, 341–347.
Production Engineering Department, Univ. Estadual Paulista/UNESP, Guaratinguetá, Brazil,
No. of Downloads: 7 | No. of Views: 977
