This is an Open Access article distributed under the terms of the Creative Commons Attribution License (CC BY 4.0) (http://creativecommons.org/licenses/by/4.0)
A Study on Flat Slab Assessment with ETABS Software
Reqibul Yousuf , Ashish Kumar, Azmat Hussain
Abstract
Flat slabs are becoming increasingly fashionable these days, both architecturally and aesthetically. Flat slabs are gaining popularity these days due to their numerous benefits. Flat slabs are utilised in the construction of high-rise structures because they lower building height, allow for easy reinforce placement, require less time to build, and are easier to shape. Flat slab construction is commonly utilized in reinforced concrete structures all over the world because it decreases the cost of form work, construction time, and is simple to install. Without the need of beams, the floor slab system directly supports the columns. In general, the most common challenge encountered when constructing a flat slab is punching shear and flexure shear failure. In my research, I used ETABS software to develop flat slabs for flexural shear.
Keywords
Flat Slabs, flexure shear, Drop, ETABS software
Reference
Madiwalar, Renuka & Vijapur, Vinayak. (2016). Comparative Study of Different Type of Flat Slab and Conventional Slab for an RC Structure Under Earthquake Loading. Bonfring International Journal of Man Machine Interface. 4. 50-55. 10.9756/BIJMMI.8156. Ding, W. and Marchionini, G. 1997.
Ahmed, Ghafur & Aziz, Omar. (2011). Punching Shear Strength of Concrete Flat Plate Slabs During (1906-2009), Review and Analysis. 23. 151-169. 10.21271/zjpas.v23i2.
Kinnunen S., Nylander H.; Punching of Concrete Slabs without Shear Reinforcement. Transactions of the Royal Institute of Technology, No. 158, Stockholm 1960, 112 pp.
Hamada, Sumio & Yang, Qiuning & Mao, Mingjie. (2008). Evaluation of Punching Shear Strength of Reinforced Concrete Slabs Based on Database. Journal of Advanced Concrete Technology - J ADV CONCR TECHNOL. 6. 205-214. 10.3151/jact.6.205.
Said, A.M. & Tian, Ying & Hussein, A.. (2011). Evaluating punching shear strength of slabs without shear reinforcement using artificial neural networks. American Concrete Institute, ACI Special Publication. 107-124.
Cites this article as
[Reqibul Yousuf, Ashish Kumar, Azmat Hussain
(2021), A Study on Flat Slab Assessment with ETABS Software, International Journal of Innovative Research in Engineering & Management (IJIREM), Vol-8, Issue-6, Page No-1-4], (ISSN 2347 - 5552). www.ijirem.org
Corresponding Author
Reqibul Yousuf
Department of Civil Engineering, RIMT University, Gobindgarh, Punjab India
(reqibulyousuf96@gmail.com)